6/25/2023 0 Comments Anchor watch appTo minimize false alerts only location changes faster then 2 m/s are accepted. The default value of 0 triggers the alert instantly. This is to avoid false alerts due to temporarily fluctuating GPS data. You can specify a delay in seconds, before the alert is triggered. This can also be used to stop the alert sound after the alert got triggered. The alert can also be deactivated by pressing the button. The radius should be at least chain length + 2/3 ship length + 5 - 10m reserve. Also give allowance for the position of the device on the boat - which usually will not been at the bow. The alert radius should not be set too tight. If your anchor slips your bow is likely to turn to either side and will finally trigger the alert.įor this mode to work you have to align your device along the ship axis and it shouldn't obviously not moved after the alarm is armed. ![]() You can define a port and a starboard limit for the heading. In this mode only the current heading is used for triggering an alert. This mode is activated using the icon and selecting the 3rd option (Compass). ![]() The anchor can also be dropped in "shore mode", i.e. When everything is set up as intended, the alert function can be armed by pressing the button. Also the alert radius can be adjusted by dragging the red alert circe in or out.Īfter dropping anchor the distance circles will stay fixed at the set anchor position and cease to move with the ship. The anchor position can be moved afterwards by a long click on the anchoring symbol. ![]() In either case, the title bar will switch to green. Here you can either specify a bearing and distance from the current ship position to the anchor as well as the alert radius - or use the current position. The alert radius will be taken from the default settings. Click on the map and confirm the dialog Drop anchor here ?.The distance circles will move together with the ship position. Quickstart (iPhone and iPad) Application startĪfter the start of the app the map will be centered on the current position of the ship but movement will not be tracked until either the anchor is dropped or tracking is activated with the.
0 Comments
Leave a Reply. |